Paste with a high graphite content,high-pressure additives

As primer for large Open Gears,gear racks and siding surfaces

Manually to clean surfaces; do not usein centralised lubrication systems

Priming lubricant with white

solid lubricants

Used as priming lubricant

for Open Gears

By spatula, brush or non-fiber cloth ontopreviously cleaned surfaces

Sprayable running-in lubricantsfor Open Gears

Can be applied to single- and

double-pinion drives of any kindof tube mills and kilns

Via automatic spraying systems.Spraying should be effected permanently andhighest possible quality

Sprayable running-in lubricant forOpen Gears

Used to smoothen the tooth surface of newly installed girth gears or pinionsand for optimizing the load-Carrying

pattern

By automatic spraying systems

Sprayable running-in lubricantsfor large Open Gears

Is used on Open Gear drives of tubemills and kilns, dryers and crushers

Applied via standard spray lubrication systems

Sprayable, graphite-containing

adhesive lubricant for Open Gears

Is used for heavy-load applicationsbecause of its high base oil viscosity

Applied via standard spraying system

Highly viscous, sprayable adhesivelubricant for Open Gear drives

Suited for shock loads in heavy-duty applications because of its highbase oil viscosity and the resulting

good cushioning effect

Sparingly applied by commercially

available spraying systems

Sprayable, extremely high-

viscosity adhesive lubricant

for Open Gears

High base oil viscosity and thus' gooddamping characteristics make it especially in table for shock-loaded gear inheavy-duty applications

Applied economically via conventional spraylubrication system:.s. At temperatures below+5*C/+40"F additional heating systems mayhave to be used for spraying

Increased-viscosity adhesive lubricant with white solid

lubricants forOpen Gears

Especially tor application on OpenGears in critical operating conditions

Suitable for the application in bathand Circulation systems

High-viscosity adhesive lubricantwith white solid lubr- cants forOpen Gears

Especially for Open Gears under criticaloperating conditions, such as slowspeed kiln drives withincreased tooth

flank temperatures, mill drives withextreme drive power, and drives frequently operated under start-stop conditions

Suitable for the application in bathand circulation systems